﻿ How many degrees difference between celsius and fahrenheit? - AssignmentGrade.com

# How many degrees difference between celsius and fahrenheit?

QUESTION POSTED AT 16/04/2020 - 07:49 PM

Boiling water (at normal pressure) measures 100° in Celsius, but 212° in Fahrenheit. And as water freezes it measures 0° in Celsius, but 32° in Fahrenheit.

## Related questions

### 1. An object is moving to the right in a straight line. The net force acting on the object is also directed to the right, but the magnitude of the force is decreasing with time. How will the motion of the object change? a. It will continue to move to the right, its speed increasing with time. b. It will stop and then begin moving to the left. c. It will continue to move to the right at a constant speed. d. It will continue to move to the right, its speed decreasing with time. 2. A glass table top is able to exert a maximum normal force of 1600 N. A large object with a mass of 165 kg is gently lowered onto the center of the table top, then released there. What most likely will happen next? a. The table top will crack but still hold the object. b. The table top will break and the object will fall to the floor. c. The object will bounce off the table. d. The object will rest on the table top, which remains in tact. 3. A rock at rest has weight 138 N. What is the weight of the rock when it is accelerating upward at 12 m/s2? a. 115 N b. 63 N c. 304 N d. 138 N 4. A chair of mass 30.0 kg is at rest on a horizontal floor. The floor is not frictionless. You push on the chair with a force of 80.0 N directed at an angle of 35.0° to the floor. What is the normal force that the floor exerts on the chair? a. 363 N b. 340 N c. 294 N d. 317 N 5. Two particles are separated by a distance d. At this distance, the strong interaction between them is much greater than the electrical interaction. What are the possible values of d? a. extremely large values, such as the distances between the planets and sun b. extremely small values, such as the distances between particles in an atomic nucleus c. values between 1 mm and 1 m d. values between 1 m and 1 km 6. A soccer player kicks a ball. Why does the action force exerted by the player's foot cause a different motion than the reaction force? a. The action force and the reaction force act on different objects. b. The action force is greater than the reaction force. c. The reaction force is greater than the action force. d. The action force and the reaction force act in opposite directions. 7. A box of weight 320 N is being pulled to the right by a pulling force F-> of magnitude 44 N. The coefficient of static friction between the box and the floor is 0.15. To make an accurate free-body diagram of the box, the letter f in the diagram above should be replaced with the label _____. a. 4.0 N b. 48 N c. 44 N d. 280 N 8. I have the answer 9. A man pulls a wagon with a handle that is at an angle of 42° with the ground. If the man pulls with 330 N of force, how much force pulls the wagon forward? a. 110 N b. 220 N c. 245 N d. 330 N 10. In this free-body diagram, the weight (W) and normal force (n) have equal magnitudes. The magnitudes of any forward or backward forces, however, are not determined. The free-body diagram will not apply to which of these objects or persons? a. a box sliding across a table at constant speed b. an automobile accelerating on a flat highway c. a box at rest on a table d. a woman jumping off the floor 11. A force of 1 N will cause a mass of 1 kg to have an acceleration of 1 m/s2. Therefore, a force of 8 N applied to a mass of 1 kg will cause it to accelerate at what rate? a. 8 m/s2 b. 0.13 m/s2 c. 1 m/s2 d. 9 m/s2 e. 64 m/s2

QUESTION POSTED AT 02/06/2020 - 01:27 AM

### Two scientists have a difference of opinion about something supernatural and they engage in a rational argument.What can we call this

QUESTION POSTED AT 01/06/2020 - 04:47 PM

### A substance is boiled repeatedly and stirred, but the solute never mixes with the solvent. Which best describes why? The temperature was not high enough to mix the solute and solvent. The chemical properties of the solute and solvent are different. The pressure was increased. The solution was saturated.

QUESTION POSTED AT 01/06/2020 - 02:38 PM

### 15. Which of the following is accurate when discussing specific heat? A. Specific heat values for solids will never vary for different ranges of temperature. B. The specific heat of a gas can be measured at constant volume only. C. Specific heat values for liquids will never vary for different ranges of temperature. D. The specific heat of a gas may be measured at constant pressure

QUESTION POSTED AT 01/06/2020 - 02:19 PM

### Which best describes convection?it relies on the collision of particles within or between substances.it occurs in solids, liquids, or gases that are heated.it results when portions of a liquid cool and rise.it is driven by temperature differences within a fluid?

QUESTION POSTED AT 01/06/2020 - 01:49 PM

### A quantity of gas has a volume of 0.20 cubic meter and an absolute temperature of 333 degrees kelvin. When the temperature of the gas is raised to 533 degrees kelvin, what is the new volume of the gas? (Assume that there's no change in pressure.) A. 0.0006 m3 B. 0.3198 m3 C. 0.2333 m3 D. 0.2146 m3

QUESTION POSTED AT 01/06/2020 - 12:16 PM

### Put the pairs of atoms in order, with the pair that has the biggest electronegativity difference between the two atoms at the top of your list. Fluorine and Francium, Phosphorus and lithium, nitrogen and sodium, Chlorine and cesium, nitrogen and sulfur.

QUESTION POSTED AT 29/05/2020 - 05:29 PM

### Which of the following statements are true about metallic bonds? A. Metallic bonds hold together atoms with somewhat similar electronegativities. B. Metallic bonds hold together two atoms of two different nonmetals. C. Metallic bonds exist between two atoms of the same element. D. Metallic bonds hold together a water molecule.

QUESTION POSTED AT 29/05/2020 - 05:22 PM

### A _____ tells you what the different symbols and lines represent on a map.

QUESTION POSTED AT 29/05/2020 - 03:23 PM

### Which one of the following statements best illustrates implicit memory? A. Gina searched her memory and explained that if you know two angles of a triangle, you also know the third, since 180 degrees minus the sum of the two angles gives you the answer. B. At age 40, after 15 years, George got on his old bike and found he could still ride it without falling on his face. C. Maxwell pondered that time, so long ago, when President Roosevelt spoke on the family radio. D. Grace had heard the story about how, when she was three, she blew out the candles on the cake many times. In fact, she wasn't sure whether she remembered the incident or just imagined she did.

QUESTION POSTED AT 29/05/2020 - 02:54 PM

### From your surrounding observe different object which are in motion. categorize them in linear, oscillatory, vibratory etc. motions

QUESTION POSTED AT 29/05/2020 - 02:06 PM

### What is the difference between velocity and acceleration

QUESTION POSTED AT 29/05/2020 - 01:06 PM

### Magma's thickness and viscosity are affected by differences in the amount of A. andesite. B. silica. C. rhyolite. D. basalt.

QUESTION POSTED AT 29/05/2020 - 11:26 AM

### If circle a has a radius of 0.5 and circle b has a radius of 0.3, what is the difference in area between the two circles?

QUESTION POSTED AT 29/05/2020 - 11:25 AM

### What is the difference between dbi and dbd?

QUESTION POSTED AT 29/05/2020 - 11:10 AM

### Which statement best describes how work and power are different? (2 points) Select one: a. To find work we need to know force and distance; to find power we need to know force and velocity. b. To find work we need to know energy and time; to find power we need to know energy and distance. c. To find work we need to know velocity and distance; to find power we need to know distance and time. d. To find work we need to know distance and force; to find power we need to know energy and velocity.

QUESTION POSTED AT 29/05/2020 - 10:33 AM

### How many minimum number of non zero vectors in different planes can be adder to give zero resultant

QUESTION POSTED AT 29/05/2020 - 10:20 AM

### A yacht is pushed along at a constant velocity by the wind. The wind force is 180N at an angle of 25 degrees to the direction of the of the motion of the yacht. By resolving the wind force parallel and perpendicular to the direction of motion, determine the component of the wind force in the direction of motion.

QUESTION POSTED AT 29/05/2020 - 10:18 AM

### If you were to mix 3 liters of 20 degrees celsius water with 4 liters of 30 degrees water at 7 liters of water what temperature

QUESTION POSTED AT 29/05/2020 - 10:12 AM

### What is the difference between an iris-in and an iris-out? an iris-in begins with a small circle that expands, while an iris-out gradually closes an image. an iris-out begins with a small circle that expands, while an iris-in gradually closes an image. an iris-in is a transitional device in which shot b gradually appears over shot a, while an iris-out fades to black before shot b appears. an iris-out is a transitional device in which shot b gradually appears over shot a, while an iris-in fades to black before shot b appears?

QUESTION POSTED AT 29/05/2020 - 09:48 AM

### Which statement best explains a difference between the interaction of light with clear glass and the interaction of light with silver metal? Light slows down when it interacts with glass but not when it interacts with metal. Light slows down when it interacts with metal but not when it interacts with glass. Most of the light passes through glass but none of the light passes through metal. Most of the light is absorbed by glass but none of the light is absorbed by metal.

QUESTION POSTED AT 29/05/2020 - 01:56 AM

### What is the electric field between two parallel plates if the electric potential difference between the plates is 24 V and the plates are 65mm apart? A) 0.0027 N/C B) 1.6 N/C C) 369 N/C D) 1560 N/C

QUESTION POSTED AT 29/05/2020 - 01:25 AM

### Element A and element B have bonded and formed compound AB. Which of the following statements is true? Compound AB has chemical and physical properties that are completely different from those of A and B. Compound AB has chemical and physical properties that are a blend of the properties of A and B. Compound AB has chemical and physical properties that are similar to A but not like B. Compound AB has chemical and physical properties that are similar to B but not like A. NEXT

QUESTION POSTED AT 28/05/2020 - 08:14 PM

### Brainliest and 15 Points for answer! The coefficient of static friction between the tires of a car and asphalt is μ = 0.77. What is the steepest angle at which the car can be parked without rolling down? Round to the nearest degree. 30° 38° 40° 45°

QUESTION POSTED AT 28/05/2020 - 07:31 PM

### Ryan is experimenting with core materials for an electromagnet. He slides different core materials through a coil of current-carrying wire. Sort the core materials based on whether they will or won’t increase the strength of Ryan’s electromagnet. A)wood,B)steel.C)silver. D)nickel. E)iron.F)glass

QUESTION POSTED AT 28/05/2020 - 07:24 PM

### A particle is moving in a circle of radius R with constant speed.The time period of particle is T=1 second.In a time t=T/6,if the difference between average speed and magnitude of average velocity of particle is 2 m/sec,find the radius of circle

QUESTION POSTED AT 28/05/2020 - 07:21 PM

### A resistor carries a current of 0.10 amperes when the potential difference across it is 5.0 volts. The resistance of the resistor is?

QUESTION POSTED AT 28/05/2020 - 03:05 PM

### Which of the following causes a current in an electrical circuit? A. resistance B. a current difference C. a voltage difference D. the shape of the electrical circuit

QUESTION POSTED AT 28/05/2020 - 01:39 AM

### The product shown is a difference of squares. What is the missing constant term in the second factor?(–5x – 3)(–5x + )

QUESTION POSTED AT 28/05/2020 - 01:32 AM

### 1 2 3 4 5 6 7 8 9 10 TIME REMAINING 32:11 Which statements describe how a machine can help make work easier? Check all that apply. It can put out more force than the input force by decreasing the distance through which force is applied. It can increase the amount of work performed if the output force is in the same direction as the input force. It can apply a force to an object in a different direction than the force applied to the machine. It can increase the distance through which a force acts by exerting less force than was used on it. It can exert a greater force through a greater distance than the force used on the machine.

QUESTION POSTED AT 27/05/2020 - 11:29 PM